rails part 2....first router experience

shaping up the rails today. borrowed a router from wills golf cars and used a 1/4 inch round over bit. 

had to practice on some old 2x4s....it didnt go well at first but once i got the depth set up correctly, it went beautifully. 

i still sanded over top with 220 grit. 

the stems came out ok too. 

then i covered her with the first coat of epoxy and will let it cure overnight. 

also went ahead and filled some gaps on the interior

to get an early start on the daggerboard trunk, i coated the skeg and the trunk as well. 

now i just need to get my garage warm enough for this stuff to cure!